Battery Testing System
We develop and manufacture quality and reliable computer controlled testing equipments for the development and production of all types of batteries and electrochemical energy-storage devices.
Features:
- Multiple Independent Channels each with its own ADC, DAC, microprocessor and measurement circuit.
- Precision Control and Measurement: Three current ranges and two voltage ranges to maximize control and measurement accuracy up to 0.02% of the full scale range.
- Independent Upper and Low Voltage Clamp Circuits prevent battery from overcharge and excessive discharge. Different channel clamp voltages can be set independently by the testing software, allowing different types of batteries to be tested with different clamp voltages simultaneously.
- Channel Status Visual Display: current range, voltage range and control type LEDs indicate each channel's working status.
- High Speed Pulse Output: completely user defined voltage and current pulse output controlled by FPGA hardware, independent from other channels without interference. Maximum of 10 stages, minimum stage width 100uS, maximum 85 seconds and timing resolution is 1uS. Each channel can output single pulse, multiple pulses, pulse series or continuous pulses. Different channels can output different type pulses at the same time.
- Wide Current and Voltage Range covers virtually all types of applications: output current from 100uA to 500A, voltage output up to 600VDC.
- Highly Integrated Modular Design ensures reliability and ease of maintenance.
- Reliable Safety Protection: Hardware protection circuit protects over current and over voltage. Fast system response to battery false conditions prevents system damage from improper operation.
- Auxiliary Inputs: voltage, temperature, pressure etc.
- Different Data Communication Interface: SMBus, I²C, 1-Wire, CAN. Can read and write Smart Batteries internal register information.
- Automatic System Cooling Control: Cooling fan automatically turns off to reduce environment noise during low power output.
- Cutting Edge Circuit Design and Component Selections to achieve the highest system performance and reliability.
Jmida Technology provides full solutions for our customers' battery testing requirements.
Single Channel Battery Pack/Cell Tester
Key features:
| Current (Max): | 10A |
| Voltage (Max): | 100V |
| Accuracy: | 0.05% FSR |
| Connect to PC by USB port | |
| Competitive Pricing!!! |
FT100 Battery Tester
FT100 is a 4 channels, high accuracy, high resolution and high speed battery testing system. Each channel is operated and controlled independently. Each channel can output or source constant current or constant voltage, and test battery charging or discharging. Compatible with multiple current and voltage range to maximize control and measurement accuracy.
Precise timing, user-defined current or voltage pulse output. Each channel pulse output is independently controlled by the hardware, and can output different pulses simultaneously without interference. The pulse width resolution is 1uS.
This portable design is used for R&D and lab testing of batteries and other electrochemical energy-storage devices.
Key features:
| Number of Channels: | 4 |
| Current Range: | 3 |
| (1mA, 100mA, 3A) | |
| Voltage Range: | 2 |
| (-1V ~ +1V, -3V ~ +10V) | |
| Accuracy: | 0.02% FS |
| High Speed Pulse Output |
User defined pulse output
Maximum 10 steps Minimum step width 100uS Each step maximum 85S Time resolution 1uS |
Available Options:
- Voltage, Temperature, pressure etc auxiliary measurements are available upon customer requirement.
- Smart battery test is available upon customer requirement.
- Current/Voltage Range can be modified upon customer requirement.
FT1000 Multichannel Battery Tester
FT1000 is a multiple channels, high accuracy, high resolution and high speed data acquisition testing system. Each channel is operated and controlled independently. It is designed for R&D and production of batteries and other electrochemical energy-storage devices.
Key features:
| Number of Channels: | >4 |
| Current Range: | 3 |
| Voltage Range: | 2 |
| Accuracy: | 0.05% FS |
Available Options:
- Precise timing, user defined current or voltage pulse output. Each channel pulse output is independently controlled by the hardware. The pulse width resolution is 1uS.
- Voltage, Temperature, pressure etc auxiliary measurements are available upon customer requirement.
- Smart battery test is available upon customer requirement.
- Current/Voltage Range can be modified upon customer requirement.
|
FT1000-64A 10VDC 5A 64 Channels |
FT1000-16HV 100VDC 20A 16 Channels |
Jmida Technology specializes in developing new functions to meet customer special requirements and applications.
High power battery test system
We are able to deploy high power, high voltage and high current battery testing system base on customer requirements. Current output up to 500A, voltage output up to 600VDC.
Key features:
| Current Range: | 3 | Maximum 500A |
| Voltage Range: | 2 | Maximum 600VDC |
| Accuracy: | 0.1% FS |
FT2000-HP-2 500VDC 200A 2 Channels |
Software Features:
- Windows Operated - Battery_LabPro is powerful, easy-to-use battery testing software that is compatible with all Windows Operating Systems.
- Ethernet TCP/IP or USB Protocol - The program uses Ethernet TCP/IP or USB protocol for communication between PC and testing system.
- Independently Operated Channels - Each channel is independent of other channels, allowing different tests to be performed on different test channels simultaneously without interference.
- User-Defined Program - Users can customize their own program or test profile to test different batteries with the Battery_LabPro software.
- Flexible Operation Modes: constant current, constant voltage, constant load and power, as well as linear ramp, staircase, pulse etc.
- Multiple Step Ending Conditions - User can set multiple ending conditions such as step time, voltage, current, charge/discharge capacity, charge/discharge energy, internal resistance etc. When test data meet one or multiple ending conditions, the test will automatically switch to the next step or end.
- Unlimited Test Steps and Cycles.
- Dynamic Data Acquisition allows user to capture data in a different manner for each step based on changes in time, voltage or current etc, to record the most useful data with minimum data file size.
- Powerful Data Processing Capability - Test results can be zoomed or printed. User can assign X and Y axial to any parameter to show the changes in one parameter relative to the other. The result data can be exported to other data format for further data processing.
